
Electronic Component Sensor ICM-42670-P
The ICM-42670-P is a high performance 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and

The ICM-42670-P is a high performance 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and

The AR0130 is a progressive−scan sensor that generates a stream of pixel data at a constant frame rate.

The SHT20 humidity and temperature sensor of Sensirion has become an industry standard in terms of form factor and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3

The MS5611-01BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2 C bus interface. This barometric pressure sensor is optimized for altimeters and

Microchip Technology Inc.’s MCP9804 digital temperature sensor converts temperatures between -40°C and +125°C to a digital word with ±0.25°C/±1°C (typical/maximum) accuracy.

The AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply voltages between 4 V and 30 V the device acts as a

The LM75A is a temperature-to-digital converter using an on-chip band gap temperature sensor and Sigma-delta A-to-D conversion technique. The device is also a thermal detector providing an

The BME680 is a digital 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA

General Description The BME280 is as combined digtal humidity, pressure and temperature sensor based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA

Key features ●High performance accelerometer and gyroscope (hardware synchronized) ●Very low power consumption: typ. 925 μA (accelerometer and gyroscope in full operation) ●Android Lollipop

MotionInterface™ is becoming a “must-have” function being adopted by smartphone and tablet manufacturers due to the enormous value it adds to the end user experience. In smartphones, it finds use in

The triaxial BMA422 is an ultra-small, low-g acceleration sensor with digital interfaces, especially aiming for low-power consumer electronics applications. Accordingly, the BMA422 accelerator is the