Electronic Component Sensor MPU-6050

MotionInterface™ is becoming a “must-have” function being adopted by smartphone and tablet manufacturers due to the enormous value it adds to the end user experience. In smartphones, it finds use in applications such as gesture commands for applications and phone control, enhanced gaming,...

Introduction: Welcome to the world of MPU-6050! A high-quality, reliable, and feature-packed electronic component for your business needs. As a manufacturer located in China, we take pride in offering our clients a wide range of products. MPU-6050 is one of our flagship products which we are excited to introduce to the global market. What Is MPU-6050? MPU-6050 is an electronic component that integrates a 3-axis gyroscope and a 3-axis accelerometer in a single chip. It is used in various applications such as motion sensing, gaming, robotics, drones, and virtual reality devices. MPU-6050 offers accurate and reliable results due to its advanced calibration technology. Features and Benefits of MPU-6050: 1. High Precision: MPU-6050 offers high accuracy in measurement due to its advanced calibration technology. It provides reliable and accurate results for motion sensing, gaming, robotics, drones, and virtual reality applications. 2. Dual Axis sensing: MPU-6050 has a 3-axis gyroscope and a 3-axis accelerometer combined into a single chip. This dual-axis sensing helps in providing precise motion tracking and accurate orientation to various devices. 3. Low Power Consumption: MPU-6050 requires low power consumption for operation, which makes it ideal for battery-powered applications. It consumes less power than other motion sensors, and thus, increases the battery life of the device. 4. Compatible with Arduino: MPU-6050 is compatible with Arduino and other development boards. This makes it easy to integrate into various projects, and it becomes easy to control the device. 5. Cost-Effective: MPU-6050 is an economical and cost-effective solution for motion sensing and orientation tracking. Its low cost and high-performance make it an ideal fit for various industries. 6. Robust Design: The chip is designed to withstand harsh environments, vibrations, and shocks. The design makes it suitable for applications that require rugged performance and high reliability. Applications MPU-6050 is widely used in various applications such as: 1. Motion Sensing: MPU-6050 provides precise motion tracking in devices such as smartphones, tablets, gaming devices, and other wearable technology. 2. Robotics: It is used in various robotic applications such as unmanned aerial vehicles (UAV), autonomous robots, and industrial automation. 3. Drones: MPU-6050 plays a vital role in providing stability and accurate orientation to the drone while flying. 4. Virtual Reality: It is used in virtual reality devices such as head-mounted displays, joysticks, and hand controllers, providing natural and intuitive motion tracking. 5. Fitness Tracker: MPU-6050 is also used in fitness trackers, such as wearable heart rate monitors, to track movement and exercise. Conclusion In conclusion, MPU-6050 stands out as a reliable, cost-effective, and high-performance motion sensor. Its wide range of applications makes it a versatile component for various industries such as robotics, gaming, and virtual reality. The low power consumption and robust design make it ideal for battery-powered applications and harsh environments. The compatibility with Arduino and other development boards makes MPU-6050 easy to integrate into projects. We take pride in our quality products, and MPU-6050 is no exception. Try it out today and experience the difference it can make for your business. MotionInterface™ is becoming a “must-have” function being adopted by smartphone and tablet manufacturers due to the enormous value it adds to the end user experience. In smartphones, it finds use in applications such as gesture commands for applications and phone control, enhanced gaming, augmented reality, panoramic photo capture and viewing, and pedestrian and vehicle navigation. With its ability to precisely and accurately track user motions, MotionTracking technology can convert handsets and tablets into powerful 3D intelligent devices that can be used in applications ranging from health and fitness monitoring to location-based services. Key requirements for MotionInterface enabled devices are small package size, low power consumption, high accuracy and repeatability, high shock tolerance, and application specific performance programmability – all at a low consumer price point. The MPU-60X0 is the world’s first integrated 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) all in a small 4x4x0.9mm package. With its dedicated I2C sensor bus, it directly accepts inputs from an external 3-axis compass to provide a complete 9-axis MotionFusion™ output. The MPU-60X0 MotionTracking device, with its 6-axis integration, on-board MotionFusion™, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. The MPU-60X0 is also designed to interface with multiple noninertial digital sensors, such as pressure sensors, on its auxiliary I2C port. The MPU-60X0 is footprint compatible with the MPU-30X0 family. The MPU-60X0 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and three 16-bit ADCs for digitizing the accelerometer outputs. For precision tracking of both fast and slow motions, the parts feature a user-programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g. An on-chip 1024 Byte FIFO buffer helps lower system power consumption by allowing the system processor to read the sensor data in bursts and then enter a low-power mode as the MPU collects more data. With all the necessary on-chip processing and sensor components required to support many motion-based use cases, the MPU-60X0 uniquely enables low-power MotionInterface applications in portable applications with reduced processing requirements for the system processor. By providing an integrated MotionFusion output, the DMP in the MPU-60X0 offloads the intensive MotionProcessing computation requirements from the system processor, minimizing the need for frequent polling of the motion sensor output. Communication with all registers of the device is performed using either I2C at 400kHz or SPI at 1MHz (MPU-6000 only). For applications requiring faster communications, the sensor and interrupt registers may be read using SPI at 20MHz (MPU-6000 only). Additional features include an embedded temperature sensor and an on-chip oscillator with ±1% variation over the operating temperature range. By leveraging its patented and volume-proven Nasiri-Fabrication platform, which integrates MEMS wafers with companion CMOS electronics through wafer-level bonding, InvenSense has driven the MPU-60X0 package size down to a revolutionary footprint of 4x4x0.9mm (QFN), while providing the highest performance, lowest noise, and the lowest cost semiconductor packaging required for handheld consumer electronic devices. The part features a robust 10,000g shock tolerance, and has programmable low-pass filters for the gyroscopes, accelerometers, and the on-chip temperature sensor. For power supply flexibility, the MPU-60X0 operates from VDD power supply voltage range of 2.375V-3.46V. Additionally, the MPU-6050 provides a VLOGIC reference pin (in addition to its analog supply pin: VDD), which sets the logic levels of its I2C interface. The VLOGIC voltage may be 1.8V±5% or VDD. The MPU-6000 and MPU-6050 are identical, except that the MPU-6050 supports the I2C serial interface only, and has a separate VLOGIC reference pin. The MPU-6000 supports both I2C and SPI interfaces and has a single supply pin, VDD, which is both the device’s logic reference supply and the analog supply for the part. The table below outlines these differences: Why choose us? Our Acceleration Sensor products are designed to reduce overall costs and increase efficiency. We adopt world-class technology, promote independent innovation, and implement product optimization and innovation. Our team consists of experienced professionals who are dedicated to creating quality Acceleration Sensor products. While pursuing our own development, our company has established a set of management systems for quality, environmental protection, health and stability in order to maintain a healthy and stable development. Our customer service team is available to answer any questions regarding our Acceleration Sensor products. With professional technology, mature products, advanced quality, stable supply and honest service, we have gained a good reputation in the market and stand out among the peers. We have a strict quality control process to ensure the highest standards for our Acceleration Sensor products. We invites you and your company to thrive together with us and share a dazzling foreseeable future in world-wide market place. We offer expert technical support for all our Acceleration Sensor products. Our full range of MPU-6050 cover all parts of the country, and are sold in large quantities and multiple batches to overseas and enter the international market. Hot Tags: Electronic Component Sensor MPU-6050, China Electronic Component Sensor MPU-6050 suppliers, manufacturers, peripheral acceleration sensor, acceleration sensor, angular acceleration sensor, acceleration vibration sensor, accel sensor, velocity and acceleration sensor