
Electronic Component Sensor BME680
The BME680 is a digital 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA

The BME680 is a digital 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA

The DRV5032 device is an ultra-low-power digital switch Hall effect sensor, designed for the most compact and battery-sensitive systems. The device is offered in multiple sampling rates, output

The SHT20 humidity and temperature sensor of Sensirion has become an industry standard in terms of form factor and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3

The MS5611-01BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2 C bus interface. This barometric pressure sensor is optimized for altimeters and

Microchip Technology Inc.’s MCP9804 digital temperature sensor converts temperatures between -40°C and +125°C to a digital word with ±0.25°C/±1°C (typical/maximum) accuracy.

The AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply voltages between 4 V and 30 V the device acts as a

The LM75A is a temperature-to-digital converter using an on-chip band gap temperature sensor and Sigma-delta A-to-D conversion technique. The device is also a thermal detector providing an

The ICM-42670-P is a high performance 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and

General Description The BME280 is as combined digtal humidity, pressure and temperature sensor based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA

Description The DRV5032 device is an ultra-low-power digitalswitch Hall effect sensor, designed for the most compact and battery-sensitive systems. The device is offered in multiple magnetic

High and low precision accelerometers, micro-accelerometers, plus meters, different response frequencies, various precisions, and miniature sizes can be directly soldered on the PCB board.

The ultra-low power BMI260 is an IMU consisting of a 16-bit tri-axial gyroscope and a 16-bit tri-axial accelerometer combining precise acceleration, angular rate measurement and intelligent on-chip