
GD32E230K8U6
The GD32E230xx device belongs to the value line of GD32 MCU family. It is a new 32-bit general-purpose microcontroller based on the ARM® Cortex®-M23 core. The Cortex-M23 processor is an

The GD32E230xx device belongs to the value line of GD32 MCU family. It is a new 32-bit general-purpose microcontroller based on the ARM® Cortex®-M23 core. The Cortex-M23 processor is an

The STM8L052C6T6 is a 8 bit ultra-low-power MCU microcontroller with 32 KB Flash and 256 byte data EEPROM and RTC etc.

The RTL8152B-VB-CG is an excellent integrated 10/100M transceiver that fully supports both USB 2.0 and 1.1. This is a top-quality product that has been carefully designed to meet all your networking

The STM32F407VGT6 is an innovative microcontroller that comes equipped with a range of impressive features. In particular, its LCD parallel interface supports 8080 and 6800 modes, allowing for smooth

The ATtiny25/45/85 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny25/45/85 achieves

This section contains a brief overview of the CPU architecture of the dsPIC30F. For additional hardware and programming information, please refer to the “dsPIC30F Family Reference Manual” (DS70046)

STM32H743xI devices are based on the high-performance Arm® Cortex®-M7 32-bit RISC core operating at up to 400 MHz. The Cortex® -M7 core features a floating point unit (FPU) which supports Arm®

The STM32F030x microcontroller incorporates the high-performance ARM Cortex™-M0 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 64 Kbytes of Flash memory and up

The STM8S003x value line 8-bit microcontrollers feature 8 Kbytes Flash program memory,plus integrated true data EEPROM. The STM8S microcontroller family reference manual (RM0016) refers to devices in

The device is manufactured using the Atmel high-density nonvolatile memory technology. The On-chip ISP Flash allows the program memory to be reprogrammed in-system through an SPI serial interface, by

Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port B output buffers have symmetrical drive characteristics with both high sink and source

The AT90CAN32/64/128 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the AT90CAN32/64/128 achieves