
Electronic Component Sensor ICM-42670-P
The ICM-42670-P is a high performance 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and

The ICM-42670-P is a high performance 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and

The CPT212B device, Capacitive touch sensor IC proximity sensor ics, is designed to quickly add capacitive touch via an I2C interface by eliminating the firmware complexity and reducing the

The SHT20 humidity and temperature sensor of Sensirion has become an industry standard in terms of form factor and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3

Microchip Technology Inc.’s MCP9804 digital temperature sensor converts temperatures between -40°C and +125°C to a digital word with ±0.25°C/±1°C (typical/maximum) accuracy.

The AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply voltages between 4 V and 30 V the device acts as a

The LM75A is a temperature-to-digital converter using an on-chip band gap temperature sensor and Sigma-delta A-to-D conversion technique. The device is also a thermal detector providing an

The BME680 is a digital 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA

General Description The BME280 is as combined digtal humidity, pressure and temperature sensor based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA

The characteristics of sensors include: miniaturization, digitization, intelligence, multi-function, systematization, and networking. It is the first link to realize automatic detection and automatic

Product Description The ICM-40607 is a 6-axis motion tracking device that combines a 3-axis gyroscope and a 3-axis accelerometer in a 2.5x3x0.91 mm (14-pin LGA) package. through low power consumption

GENERAL DESCRIPTION The ICM-20600 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 2.5x3x0.91mm (14-pin LGA) package. • High performance specs •

The ultra-low power BMI260 is an IMU consisting of a 16-bit tri-axial gyroscope and a 16-bit tri-axial accelerometer combining precise acceleration, angular rate measurement and intelligent on-chip