
Electronic Component Sensor ICS-43434
The ICS-43434 is a digital I2S output bottom port microphone. The complete ICS-43434 solution is transmitted by a MEMS inductors, signal conditioning, analog-to-digital converters, decimation and

The ICS-43434 is a digital I2S output bottom port microphone. The complete ICS-43434 solution is transmitted by a MEMS inductors, signal conditioning, analog-to-digital converters, decimation and

The DRV5032 device is an ultra-low-power digital switch Hall effect sensor, designed for the most compact and battery-sensitive systems. The device is offered in multiple sampling rates, output

The MPU-6500 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital MotionProcessor (DMP) all in a small 3x3x0.9mm package. It also features a

The AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply voltages between 4 V and 30 V the device acts as a

Description The MP45DT02 is a compact, low-power, topport, omnidirectional, digital MEMS microphone. The MP45DT02 is built with a sensing element and an IC interface with stereo capability. The

General description The BMI055 is an inertial measurement unit (IMU) for the detection of movements and rotations in 6 degrees of freedom (6DoF). It reflects the full functionality of a triaxial,

Description The AIS2IH is an ultra-low-power three-axis linear accelerometer which leverages on the robust and mature manufacturing processes already used for the production of micromachined

Description The IIS2DH is an ultra-low-power highperformance three-axis linear accelerometer with digital I2C/SPI serial interface standard output. The IIS2DH has user-selectable full scales of

Product Description The ICM-40607 is a 6-axis motion tracking device that combines a 3-axis gyroscope and a 3-axis accelerometer in a 2.5x3x0.91 mm (14-pin LGA) package. through low power consumption

PRODUCT OVERVIEW The ICM-40605 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 2.5x3x0.91 mm (14-pin LGA) package. It also features a 1K-byte

The ultra-low power BMI260 is an IMU consisting of a 16-bit tri-axial gyroscope and a 16-bit tri-axial accelerometer combining precise acceleration, angular rate measurement and intelligent on-chip

Digital,triaxial acceleration sensor