
Electronic Component Sensor MP45DT02TR
Description The MP45DT02 is a compact, low-power, topport, omnidirectional, digital MEMS microphone. The MP45DT02 is built with a sensing element and an IC interface with stereo capability. The

Description The MP45DT02 is a compact, low-power, topport, omnidirectional, digital MEMS microphone. The MP45DT02 is built with a sensing element and an IC interface with stereo capability. The

The CPT212B device, Capacitive touch sensor IC proximity sensor ics, is designed to quickly add capacitive touch via an I2C interface by eliminating the firmware complexity and reducing the

The ICM-42670-P is a high performance 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and

The BME680 is a digital 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles. The sensor module is housed in an extremely compact metal-lid LGA

The QMC5883L is a multi-chip three-axis magnetic sensor. This surface -mount, small sized chip has integrated magnetic sensors with signal condition ASIC, targeted for high precision applications

The ICS-43434 is a digital I2S output bottom port microphone. The complete ICS-43434 solution is transmitted by a MEMS inductors, signal conditioning, analog-to-digital converters, decimation and

The ICM-42688-P is a 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM,I2C and SPI serial

Key features ●High performance accelerometer and gyroscope (hardware synchronized) ●Very low power consumption: typ. 925 μA (accelerometer and gyroscope in full operation) ●Android Lollipop

Features • 1.95 V to 3.6 V supply voltage • 1.6 V to 3.6 V interface voltage • ±2 g/±4 g/±8 g dynamically selectable full-scale • Output data rates (ODR) from 1.56 Hz to 800 Hz • 99 μg/√Hz noise •

PRODUCT OVERVIEW The ICM-40605 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 2.5x3x0.91 mm (14-pin LGA) package. It also features a 1K-byte

The triaxial BMA422 is an ultra-small, low-g acceleration sensor with digital interfaces, especially aiming for low-power consumer electronics applications. Accordingly, the BMA422 accelerator is the

General description The BMA253 is a triaxial, low-g acceleration sensor with digital output for consumer applications. It allows measurements of acceleration in three perpendicular axes. An