Power Management Integrated Circuits K7805-2000R3
◆ Wide input voltage range: 4.5-30VDC ◆ High conversion efficiency (up to 96%), low no-load current: 0.2mA(typ) ◆ Pin compatible with LM78xx series three-terminal linear regulators ◆ Output short
Power Management Integrated Circuits IR2104STRPBF
Description The IR2104(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies
Power Management Integrated Circuits FAN7842MX
Description The FAN7842, a monolithic high and low side gate driveIC, which can drive MOSFETs and IGBTs that operate up to +200 V. Fairchild’s high-voltage process and common-mode noise canceling
Electronic Component Sensor MPU-6887
The working principle of the acceleration sensor: the sensitive element converts the acceleration signal of the measuring point into a corresponding electrical signal, enters the preamplifier
Electronic Component Sensor MPU-6050
MotionInterface™ is becoming a “must-have” function being adopted by smartphone and tablet manufacturers due to the enormous value it adds to the end user experience. In smartphones, it finds use in
Electronic Component Sensor MMA8452QR1
Features • 1.95 V to 3.6 V supply voltage • 1.6 V to 3.6 V interface voltage • ±2 g/±4 g/±8 g dynamically selectable full-scale • Output data rates (ODR) from 1.56 Hz to 800 Hz • 99 μg/√Hz noise •
Electronic Component Sensor MMA8451QR1
The MMA8451Q is a smart, low-power, three-axis, capacitive, micromachined accelerometer with 14 bits of resolution. This accelerometer is packed with embedded functions with flexible user
Electronic Component Sensor LSM6DSRTR
Description The LSM6DSR is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope with an extended full-scale range for the gyroscope, up to 4000 dps, and high stability
Electronic Component Sensor IIS2DHTR
Description The IIS2DH is an ultra-low-power highperformance three-axis linear accelerometer with digital I2C/SPI serial interface standard output. The IIS2DH has user-selectable full scales of
Electronic Component Sensor ICM-42627
High and low precision accelerometers, micro-accelerometers, plus meters, different response frequencies, various precisions, and miniature sizes can be directly soldered on the PCB board.
Electronic Component Sensor ICM-40608
An accelerometer is an electronic device capable of measuring acceleration forces. The acceleration force is the force acting on the object when the object is accelerating, just like the
Electronic Component Sensor ICM-40607-A
Product Description The ICM-40607 is a 6-axis motion tracking device that combines a 3-axis gyroscope and a 3-axis accelerometer in a 2.5x3x0.91 mm (14-pin LGA) package. through low power consumption