Request a quoteRFQ

Microcontroller MCU TM4C1233H6PGEI

Texas Instrument's Tiva C Series microcontrollers provide designers a high-performance ARM Cortex-M-based architecture with a broad set of integration capabilities and a strong ecosystem of software

Electronic Components SN74LVC1G125DRYR

This bus buffer gate is designed for 1.65-V to 5.5-V VCC operation. Package (DPW) With 0.5-mm Pitch • Supports 5-V V The SN74LVC1G125 device is a single line driver CC Operation with a 3-state

Electronic Component Diodes PMEG4005AEA

Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifier with an integrated guard ring for stress protection, encapsulated in a SOD323 (SC-76) very small SMD plastic package.

Microcontroller MCU PIC10F200T-I

The PIC10F200/202/204/206 devices from Microchip Technology are low-cost, high-performance, 8-bit, fullystatic, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33

Electronic Components PI7C9X110BNBE

PI7C9X110 is a PCIe-to-PCI bridge. PI7C9X110 is compliant with the PCI Express Base Specification, Revision 1.0a, the PCI Express Card Electromechanical Specification, Revision 1.0a, the PCI Local

Electronic Component Amplifiers OPA388IDGKR

The INA190 is a low-power, voltage-output, currentshunt monitor (also called a current-sense amplifier). This device is commonly used for overcurrent protection, precision current measurement for

Electronic Component Sensor MS5611-01BA03

The MS5611-01BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2 C bus interface. This barometric pressure sensor is optimized for altimeters and

Electronic Component Sensor MCP9804T-E

Microchip Technology Inc.’s MCP9804 digital temperature sensor converts temperatures between -40°C and +125°C to a digital word with ±0.25°C/±1°C (typical/maximum) accuracy.

Electronic Components M82C53-2

The MSM82C54-2RS/GS/JS is a programmable universal timer designed for use in microcomputer systems. Based on silicon gate CMOS technology, it requires a standby current of only 10 mA (max.) when the

Source navigation