LM393N
The LM393 consists of two independent voltage comparators. These were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is
LMV761MF
The LMV76x devices are precision comparators intended for applications requiring low noise and low input offset voltage. The LMV761 single has a shutdown pin that can be used to disable the device
TL331VSN4T3G
The TL331 is an open collector, low−power comparator designed specifically to operate over a wide supply range from 2 V to 36 V single supply and ±1 V to ±18 V for split supplies. The input
TLV3501AIDR
The TLV350x family of push-pull output comparators feature a fast 4.5-ns propagation delay and operation from 2.7 V to 5.5 V. Beyond-the-rails input commonmode range makes it an ideal choice for
TP2021-TR
The TP2021 has a push-pull output stage with loads up to 25mA. The TP2025 has an open-drain output stage that makes it suitable for mixed-voltage system design. Both feature an on-chip 1.248V ±1.4%
OP471GS
The OP471 has an input offset voltage under 0.8 mV and an input offset voltage drift below 4 mV/∞C, guaranteed over the full military temperature range. Open-loop gain of the OP471 is over 500,000
OP177GPZ
This low noise, bipolar input operational amplifier is also a cost effective alternative to chopper-stabilized amplifiers. The OP177 provides chopper-type performance without the usual problems of
AD8539ARZ
The AD8538/AD8539 are very high precision amplifiers featuring extremely low offset voltage, low input bias current, and low power consumption. The supply current is less than 215 μA maximum per
AD8538AUJZ
Low offset voltage: 13 µV maximum. Single-supply operation: 2.7 V to 5.5 V. Low input bias current: 25 pA. Low supply current: 180 µA.
TLE2142IDR
The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter
LM358N
The LM358 consists of two independent high gain, internally frequency compensated operational amplifier. It can be operated from a single power supply and also split power supplies.
MCP6002-I
The Microchip Technology Inc. MCP6001/2/4 family of Op Amps is specifically designed for general purpose applications. This family has a 90° phase margin and 1 MHz GBWP . It also maintains a 45°