TPS548D22RVF
The TPS548D22 device is a compact single buck converter with adaptive on-time, D-CAP3 mode control. It is designed for high accuracy, high efficiency, fast transient response, ease-of-use, low
TPS62203DBVR
The TPS6220x devices are a family of high-efficiency synchronous step-down converters ideally suited for portable systems powered by 1-cell Li-Ion or 3-cell NiMH/NiCd batteries. The devices are also
TPS3809K33DBVR
The TPS3809 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems. The newer TLV809E device is an alternative with the
MAX811REUS
The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by
TPS3823-33DBVR
The TPS382x serise of supervisors provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power on, RESET asserts when the supply voltage VDD
STWD100NYWY3F
The STWD100 watchdog timer circuits are self-contained devices which prevent system failures that are caused by certain types of hardware errors (non-responding peripherals, bus contention, etc.) or
TPS3824-50DBVR
Supply voltage supervision range: 2.5 V, 3 V, 3.3 V, 5 V. Watchdog timer (TPS3820/3/4/8). Supply current of 15 μA (Typical). 5-Pin SOT-23 package.
AMS1117-3.3
The AMS1117 familes of adjustable and fixed voltage regulators are make to provide up to1A output current ,while operate down to 1V input-to-output differential. The dropout voltage of the device is
LM1084IS-ADJ
The LM1084 is a regulator with a maximum dropout of 1.5 V at 5 A of load current. The device has the same pinout as TI's industry standard LM317.
AMS1086CD-3.3
The AMS1086 series of adjustable and fixed voltage regulators are designed to provide 1.5A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is
L78M05ABDT-TR
The L78MxxA series of three-terminal positive regulators is available in TO-220 and DPAK packages and with several fixed output voltages, making it useful in a wide range of applications. These
LP5907MFX-3.0
The LP5907 is a low-noise LDO that can supply up to 250 mA output current. Designed to meet the requirements of RF and analog circuits, the LP5907 device provides low noise, high PSRR, low quiescent