In the face of opportunities and challenges, our company will continue to seek and wholeheartedly provide customers with high-quality Z0107MA Marking Z0107 TO92 Thyristor Transistor, MMSZ5242B Marking H2 SOD123 Zener diode, MAX811REUS Marking ARAA SOT143 Supervisor and reset ICs. We achieve competitive advantage through continuous innovation in management, technology and market. While focusing on equipment, the company also focuses on product quality, with a sound quality assurance system and excellent after-sales service system. Enhancing vitality is an inherent requirement to promote the reform and development of our company.
FEATURES
Excellent Speed: 8 V/s Typ
Low Noise: 11 nV/˜Hz @ 1 kHz Max
Unity-Gain Stable
High Gain Bandwidth: 6.5 MHz Typ
Low Input Offset Voltage: 0.8 mV Max
Low Offset Voltage Drift: 4 V/C Max
High Gain: 500 V/mV Min
Outstanding CMR: 105 dB Min
Industry Standard Quad Pinouts
GENERAL DESCRIPTION
The OP471 is a monolithic quad op amp featuring low noise, 11 nV/˜Hz Max @ 1 kHz, excellent speed, 8 V/ms typical, a gain bandwidth of 6.5 MHz, and unity-gain stability.
The OP471 has an input offset voltage under 0.8 mV and an input offset voltage drift below 4 mV/∞C, guaranteed over the full military temperature range. Open-loop gain of the OP471 is over 500,000 into a 10 kW load ensuring outstanding gain accuracy and linearity. The input bias current is under 25 nA limiting errors due to signal source resistance. The OP471’s CMR of over 105 dB and PSRR of under 5.6 mV/V significantly reduce errors caused by ground noise and power supply fluctuations.
The OP471 offers excellent amplifier matching which is important for applications such as multiple gain blocks, low-noise instrumentation amplifiers, quad buffers and low-noise active filters.
The OP471 conforms to the industry standard 14-lead DIP pinout. It is pin-compatible with the LM148/LM149, HA4741, RM4156, MC33074, TL084 and TL074 quad op amps and can be used to upgrade systems using these devices.
For applications requiring even lower voltage noise the OP470 with a voltage density of 5 nV/˜Hz Max @ 1 kHz is recommended.
We emphasize the development of products and technological innovation, and produce our Ln-S030 Good Quality Surface Resistance Tester with scientific and stable concepts. While developing ourselves, we also fulfill our social responsibility and adhere to the green development concept of environmental protection, cleanliness and recycling. In the process of production and operation, our company implements quality management system, improves operation management and product quality.
Hot Tags: op471gs, China op471gs suppliers, manufacturers, diode laser 808nm, Transistor, semiconductor diode, commodity integrated circuit, permanent magnet sensor, din rail pc
