
Power Management Integrated Circuits REF3425IDBVR
Description The REF34xx device is a low temperature drift (6 ppm/°C), low-power, high-precision CMOS voltage reference, featuring ±0.05% initial accuracy, low operating current with power consumption

Description The REF34xx device is a low temperature drift (6 ppm/°C), low-power, high-precision CMOS voltage reference, featuring ±0.05% initial accuracy, low operating current with power consumption

The WRB1205S-1WR2 is an ultra-compact SIP package that comes equipped with short-circuit protection, which is self-restoring. Additionally, the output can be turned off as needed. These features make

The LTM4644/LTM4644-1 is a quad DC/DC step-down µModule (micromodule) regulator with 4A per output. Outputs can be paralleled in an array for up to 16A capability.

The TL431LI / TL432LI are pin-to-pin alternatives to TL431 / TL432. TL43xLI offers better stability, lower temperature drift (VI(dev)), and lower reference current (Iref) for improved system accuracy.

Features • 3-mm × 2.8-mm × 1.5-mm MicroSiP™ package • 3-V to 17-V input range • 3-A continuous output current • DCS-Control™ topology • Power save mode for light-load efficiency • 20-µA operating

Description The TPS6040x family of devices generates an unregulated negative output voltage from an input voltage ranging from 1.6 V to 5.5 V. The devices are typically supplied by a preregulated

Features • Conversion Input Voltage Range: 1.5 V to 15 V • VDD Input Voltage Range: 4.5 V to 25 V • 92% Efficiency From 12 V to 1.5 V at 20 A • Output Voltage Range: 0.6 V to 5.5 V • 5-V LDO Output •

Description The TPS51200 device is a sink and source double data rate (DDR) termination regulator specifically designed for low input voltage, low-cost, low-noise systems where space is a key

GENERAL DESCRIPTION The REF19x series precision band gap voltage references use a patented temperature drift curvature correction circuit and laser trimming of highly stable, thin-film resistors to

KP126XF is a highly integrated constant current LED power switch, chip A quasi-resonant operating mode is used, while adding an active power factor Corrective control technology can meet high power

GENERAL DESCRIPTION The MT3608 is a constant frequency, 6-pin SOT23 current mode step-up converter intended for small, low power applications. The MT3608 switches at 1.2MHz and allows the use of

Industrial and Car Audio Power Supplies. Battery Chargers, High Power LED Supply.