HEDL-5600-A06
Line Drivers are available for the HEDS-55xx/56xx series and the HEDS-9000/9100/9200/9040/ 9140 series encoders. The line driver offers enhanced performance when the encoder is used in noisy
Line Drivers are available for the HEDS-55xx/56xx series and the HEDS-9000/9100/9200/9040/ 9140 series encoders. The line driver offers enhanced performance when the encoder is used in noisy
ED203
• High breakdown voltage (VDSS = 1500 V) • High speed switching • Low drive current • No Secondary breakdown • Suitable for switching regulator, DC-DC converter
The TS5A23157 is a dual single-pole double-throw (SPDT) analog switch designed to operate from 1.65 V to5.5 V. This device can handle both digital and analog signals. Signals up to 5.5 V (peak) can
The TSB81BA3E provides the digital and analog transceiver functions needed to implement a three-port node in a cable-based IEEE 1394 network. Each cable port incorporates two differential line
The Realtek RTL8211E-VB-CG/RTL8211E-VL-CG/RTL8211EG-VB-CG are highly integrated Ethernet transceivers that comply with 10Base-T, 100Base-TX, and 1000Base-T IEEE 802.3 standards. They provide all the
BenefitsImproved Gate, Avalanche and Dynamic dV/dt RuggednessFully Characterized Capacitance and Avalanche SOAEnhanced body diode dV/dt and dI/dt Capability Lead-Free
FHP120N08B
The ADXRS646 is a high performance angular rate sensor (gyroscope) that offers excellent vibration immunity. Bias stability is a widely-recognized figure of merit for high performance gyroscopes, but
The TSB83AA23 is an integrated IEEE Std 1394b-2002 link-layer controller (LLC) design and physical layer(PHY) design combined in a single package to meet the demanding requirements of today’s 1394
The TSX3702 is a micropower CMOS dual voltage comparator which exhibits a very low current consumption of 5 µA typical per comparator. This device was designed as the improvement of the TS3702: it
This 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed