Microcontroller MCU STM32F429IIH6
Features • Memories – Up to 2 MB of Flash memory organized into two banks allowing read-while-write – Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM Compact
Features • Memories – Up to 2 MB of Flash memory organized into two banks allowing read-while-write – Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM Compact
Features • Core: ARM® 32-bit Cortex®-M3 CPU • Memories – 16 to 128 Kbytes of Flash memory • Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable
GENERAL DESCRIPTION The REF19x series precision band gap voltage references use a patented temperature drift curvature correction circuit and laser trimming of highly stable, thin-film resistors to
General Description The MAX9140/MAX9141 are single and the MAX9142/ MAX9144 are dual/quad high-speed comparators optimized for systems powered from a 3V or 5V supply. The MAX9141 features latch
Description The LMZ21700 Nano Module is an easy-to-use stepdown DC/DC solution capable of driving up to 650- mA load in space-constrained applications. Only an input capacitor, an output capacitor, a
Description The LD1117 is a low drop voltage regulator able to provide up to 800 mA of output current, available even in adjustable version (VREF = 1.25 V). Concerning fixed versions, are offered the
KP126XF is a highly integrated constant current LED power switch, chip A quasi-resonant operating mode is used, while adding an active power factor Corrective control technology can meet high power
Description The INA293-Q1 is a ultra-precise current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –4 V to 110 V. The negative common-mode
programmable logic device
The APM32F103xCxDxE series chips are 32-bit microprocessors based on the ARM Cortex-M3 core, with a maximum operating frequency of 96MHz. Built-in high-speed memory (up to 512Kbytes of flash memory
GENERAL DESCRIPTION The AD8541/AD8542/AD8544 are single, dual, and quad railto-rail input and output, single-supply amplifiers featuring very low supply current and 1 MHz bandwidth. All are
Description The device is a single channel high-side driver manufactured using ST proprietary VIPower® technology and housed in the Octapak package. The device is designed to drive 12 V automotive