Electronic Component Transceiver SN65HVD71DR
These devices extend the RS-485 portfolio with a family of full-duplex transceivers with robust 3.3-V drivers and receivers and high levels of ESD protection. The ESD protection includes > ±30-kV HBM
Electronic Component Transceiver ADM3067EBRZ
TIA/EIA RS-485 compliant over full supply range 3.0 V to 5.5 V operating voltage range on VCC 1.62 V to 5.5 V VIO logic supply option available ESD protection on the bus pins IEC 61000-4-2 ≥ ±12 kV
Electronic Component Register HV5622PG
The HV5622 is a low-voltage serial-to-high-voltage parallel converter with open drain outputs. This device has been designed as a driver for AC-electroluminescent displays. It can also be used in any
Electronic Component Trigger MC14093BCP
The MC14093B Schmitt trigger is constructed with MOS P−channel and N−channel enhancement mode devices in a single monolithic structure. These devices find primary use where low power dissipation
Electronic Component Trigger MC74AC74N
The MC74AC74/74ACT74 is a dual D−type flip−flop with Asynchronous Clear and Set inputs and complementary (Q,Q) outputs. Information at the input is transferred to the outputs on the positive edge of
Jetson AGX Xavier Developer Kit Official Module
As the upgraded successor of Jetson TX2, the Jetson AGX Xavier Developer Kit have more than 20X the performance and 10X the energy efficiency of TX2.With the Jetson AGX Xavier developer kit, you can
Jetson Xavier NX
Jetson Xavier NX Developer Kit brings supercomputer performance to the edge in a small form factor system-on-module (SOM). Up to 21 TOPS of accelerated computing delivers the horsepower to run modern
Jetson Nano 2GB
Discover the power of AI and robotics with NVIDIA Jetson Nano 2GB Developer Kit. It‘s’ small, powerful, and priced for everyone at a much lower price.
ARM Board AI Raspberry Pi 3
The Raspberry Pi 3 Model B+ is the latest in the Raspberry Pi 3 family, featuring a 64-bit quad-core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster
ARM Board AI Raspberry Pi 4
It is an ARM-based microcomputer motherboard with SD/MicroSD card as the memory hard disk. There are 1/2/4 USB ports and a 10/100 Ethernet port around the card motherboard (type A has no network
Power Management Integrated Circuits TPS2121RUXR
Features • Wide operating range: 2.8 V to 22 V – Absolute maximum input voltage of 24 V • Low RON resistance: – TPS2120: 62 mΩ (typical) – TPS2121: 56 mΩ (typical) • Adjustable overvoltage supervisor
Microcontroller MCU TMS320DM368ZCE
Features • Highlights – High-Performance Digital Media System-on-Chip (DMSoC) – 432-MHz ARM926EJ-S Clock Rate – Two Video Image Co-processors(HDVICP, MJCP) Engines – Supports a Range of Encode,