Ttsd-Model Vehicle-Mounted Gas Flow Standard Device

We always pursue the deep integration of perfect quality and excellent performance of our BT136S-600,118 Marking 136S6 TO252 Thyristor Transistor , TLV3501AIDR Marking 3501 SOP8 Comparators Amplifier , MMBT2222A Marking 1P SOT23 Triode Transistor , always based on a deep understanding of customer needs, and our products are committed to technological innovation and product upgrades. The company adheres to the development strategy goal of reputation, customer first, brand service, and standardized management, and will provide more favorable prices, more professional services, and complete the entire set of consulting, sales, and after-sales service systems, so that customers can be more assured Buy our products and have a more satisfactory evaluation of our service! We continue to innovate, doing business steadily, and strive to bring the best products and services to users. In the future development process, we will continue to pursue excellent quality, sincerely serve customers and always guide the trend of the industry. Features ■ High-density architecture with 4,608 to 68,416 LEs ● M4K embedded memory blocks ● Up to 1.1 Mbits of RAM available without reducing available logic ● 4,096 memory bits per block (4,608 bits per block including 512 parity bits) ● Variable port configurations of ×1, ×2, ×4, ×8, ×9, ×16, ×18, ×32, and ×36 ● True dual-port (one read and one write, two reads, or two writes) operation for ×1, ×2, ×4, ×8, ×9, ×16, and ×18 modes ● Byte enables for data input masking during writes ● Up to 260-MHz operation Embedded multipliers ● Up to 150 18- × 18-bit multipliers are each configurable as two independent 9- × 9-bit multipliers with up to 250-MHz performance ● Optional input and output registers Advanced I/O support ● High-speed differential I/O standard support, including LVDS, RSDS, mini-LVDS, LVPECL, differential HSTL, and differential SSTL ● Single-ended I/O standard support, including 2.5-V and 1.8-V, SSTL class I and II, 1.8-V and 1.5-V HSTL class I and II, 3.3-V PCI and PCI-X 1.0, 3.3-, 2.5-, 1.8-, and 1.5-V LVCMOS, and 3.3-, 2.5-, and 1.8-V LVTTL ● Peripheral Component Interconnect Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 3.0 compliance for 3.3-V operation at 33 or 66 MHz for 32- or 64-bit interfaces ● PCI Express with an external TI PHY and an Altera PCI Express ×1 Megacore® function ● 133-MHz PCI-X 1.0 specification compatibility ● High-speed external memory support, including DDR, DDR2, and SDR SDRAM, and QDRII SRAM supported by drop in Altera IP MegaCore functions for ease of use ● Three dedicated registers per I/O element (IOE): one input register, one output register, and one output-enable register ● Programmable bus-hold feature ● Programmable output drive strength feature ● Programmable delays from the pin to the IOE or logic array ● I/O bank grouping for unique VCCIO and/or VREF bank settings ● MultiVolt™ I/O standard support for 1.5-, 1.8-, 2.5-, and 3.3-interfaces ● Hot-socketing operation support ● Tri-state with weak pull-up on I/O pins before and during configuration ● Programmable open-drain outputs ● Series on-chip termination support Flexible clock management circuitry ● Hierarchical clock network for up to 402.5-MHz performance ● Up to four PLLs per device provide clock multiplication and division, phase shifting, programmable duty cycle, and external clock outputs, allowing system-level clock management and skew control ● Up to 16 global clock lines in the global clock network that drive throughout the entire device Device configuration ● Fast serial configuration allows configuration times less than 100 ms ● Decompression feature allows for smaller programming file storage and faster configuration times ● Supports multiple configuration modes: active serial, passive serial, and JTAG-based configuration ● Supports configuration through low-cost serial configuration devices ● Device configuration supports multiple voltages (either 3.3, 2.5, or 1.8 V) Intellectual property ● Altera megafunction and Altera MegaCore function support, and Altera Megafunctions Partners Program (AMPPSM) megafunction support, for a wide range of embedded processors, on-chip and off-chip interfaces, peripheral functions, DSP functions, and communications functions and protocols. Visit the Altera IPMegaStore at www.altera.com to download IP MegaCore functions. ● Nios II Embedded Processor support Our company attaches great importance to technology development, always adhere to the 'production, learning, research' combination, and constantly develop customer satisfaction Ttsd-Model Vehicle-Mounted Gas Flow Standard Device. The company is committed to rising rapidly in the fierce market competition and becoming one of the leading companies in the industry. Safe production is the foundation of the service provided by the group company, always keep safe production in mind and never forget sincere service everywhere. Hot Tags: ep1c6t144c8n, China ep1c6t144c8n suppliers, manufacturers, suppression diode , industrial touch panel pc , recovery diode , magnetic guide sensor , 2W10 Marking 2W10 Rectifier bridge , single electron transistor