
Electronic Component Sensor ICS-43434
The ICS-43434 is a digital I2S output bottom port microphone. The complete ICS-43434 solution is transmitted by a MEMS inductors, signal conditioning, analog-to-digital converters, decimation and

The ICS-43434 is a digital I2S output bottom port microphone. The complete ICS-43434 solution is transmitted by a MEMS inductors, signal conditioning, analog-to-digital converters, decimation and

The SHT20 humidity and temperature sensor of Sensirion has become an industry standard in terms of form factor and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3

Description The MP45DT02 is a compact, low-power, topport, omnidirectional, digital MEMS microphone. The MP45DT02 is built with a sensing element and an IC interface with stereo capability. The

The ICM-42688-P is a 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM,I2C and SPI serial

GENERAL DESCRIPTION The IAM-20680 is a 6-axis MotionTracking device for Automotive applications that combines a 3-axis gyroscope and a 3-axis accelerometer in a small 3x3x0.75mm (16-pin LGA) package.

General description The BMI055 is an inertial measurement unit (IMU) for the detection of movements and rotations in 6 degrees of freedom (6DoF). It reflects the full functionality of a triaxial,

The working principle of the acceleration sensor: the sensitive element converts the acceleration signal of the measuring point into a corresponding electrical signal, enters the preamplifier

Description The LSM6DSR is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope with an extended full-scale range for the gyroscope, up to 4000 dps, and high stability

An accelerometer is an electronic device capable of measuring acceleration forces. The acceleration force is the force acting on the object when the object is accelerating, just like the

GENERAL DESCRIPTION The ICM-20600 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 2.5x3x0.91mm (14-pin LGA) package. • High performance specs •

The triaxial BMA422 is an ultra-small, low-g acceleration sensor with digital interfaces, especially aiming for low-power consumer electronics applications. Accordingly, the BMA422 accelerator is the

General description The BMA253 is a triaxial, low-g acceleration sensor with digital output for consumer applications. It allows measurements of acceleration in three perpendicular axes. An