
Microcontroller MCU ATMEGA8A-AU
Features • High-performance, Low-power Atmel®AVR® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working

Features • High-performance, Low-power Atmel®AVR® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 x 8 General Purpose Working

The STM32F301x6/8 family is based on the high-performance ARM® Cortex®-M4 32-bit RISC core operating at a frequency of up to 72 MHz and embedding a floating point unit (FPU).

The STC12C5A32S2-35I is an amazing microcontroller that boasts of outstanding features and capabilities. It is based on the 1 clock/machine cycle 8051 architecture and is capable of ultra-strong

The STM32F407VGT6 is an innovative microcontroller that comes equipped with a range of impressive features. In particular, its LCD parallel interface supports 8080 and 6800 modes, allowing for smooth

The PIC16F193X/LF193X devices are described within this data sheet. They are available in 28/40/44-pin packages. Figure 1-1 shows a block diagram of the PIC16F193X/LF193X devices. Table 1-1 shows the

The GD32F105xx device belongs to the connectivity line of GD32 MCU Family. lt is a 32-bitgenera-purpose microcontroller based on the ARMCortex -M3 RISC core with enhancedconnectivity performance and

Features • Core: ARM® 32-bit Cortex®-M3 CPU – 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division •

Features • Core: ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz • Memories – 16 to 256 Kbytes of Flash memory – 4 to 32 Kbytes of SRAM with HW parity • CRC calculation unit • Reset and power

The CC2650 device is a wireless MCU targeting Bluetooth, ZigBee® and 6LoWPAN, and ZigBee RF4CE remote control applications.The device is a member of the CC26xx family of cost-effective, ultralow

The ATmega640/1280/1281/2560/2561 AVR is supported with a full suite of program and system development tools including: C compilers, macro assemblers, program debugger/simulators, in-circuit

SAK-TC277TP-64F200N DC belongs to the TC27xT family . Its innovative multicore architecture, based on up to three independent 32-bit TriCore CPUs, has been designed to meet the highest safety

The GD32F103xx device is a 32-bit general-purpose microcontroller based on the ARM CortexTM-M3 RISC core with best ratio in terms of processing power,reduced power consumption and peripheral set.